FCC Restrictions on Foreign-Produced Robotics: U.S. Market Access and Compliance Risks for Business Leaders

Key Takeaways

  • New products may be shut out of the U.S. market. On July 28, 2026, the Federal Communications Commission (“FCC”) added foreign-produced advanced robotic devices to its Covered List, which generally prevents those devices from receiving the new equipment authorizations required to sell in the United States. Previously authorized models generally remain marketable, but product roadmaps and launch plans should be revisited now.
  • Coverage depends on technical specifications, production criteria, and defined exclusions, not on where a manufacturer is headquartered or how a product is marketed. Everyday products such as robotic lawn mowers, robot vacuums, and delivery robots may fall within scope.
  • Customers are already asking for compliance assurances. End purchasers are increasingly requiring written certifications that robotic products comply with the FCC restrictions. Companies should verify the factual basis for these certifications and their authorization decisions before making representations to regulators, customers, lenders, or transaction counterparties.

Robotics manufacturers, importers, distributors, and the businesses that buy and deploy robots now face a U.S. market-access restriction that turns on technical and production facts. Following executive branch national security determinations, the FCC’s July 28, 2026, action means covered equipment generally cannot receive new FCC equipment authorizations, including through the Supplier’s Declaration of Conformity (“SDoC”) process. The FCC’s October 2026 FAQs have since shed additional light on how the requirement applies, and companies are already feeling its effects on product launches, customer negotiations, and supply chains. In practical terms, new covered models may be unable to launch in the United States, and supply agreements, distribution relationships, and product pipelines built around those models may be disrupted.

For leadership teams, the question is not only whether a product is covered, but whether the company can prove its conclusion quickly and credibly when a regulator, customer, or investor asks. That requires technical specifications, manufacturing records, and authorization documents that match what the company is telling the market.

Which Robotic Devices Are Covered by the FCC Restrictions?

The definition of “advanced robotic device” does not encompass every product commercially described as a robot. It covers mechanical mobile devices that satisfy specified requirements concerning ground movement, remote or sensor-based operation, weight, environmental sensing, network connectivity, and controlling software. Examples include autonomous mobile robots, humanoids, and quadrupeds. The combined weight of the device and any applicable ground or docking station must exceed 4.4 pounds, and the device must contain a network-connectivity component supporting speeds of at least 200 kilobits per second in either direction.

The rule excludes certain categories, including connected vehicles, drones, underwater vehicles, FDA-classified medical devices, and fixed, stationary robots used in industrial or medical settings.

Where Could FCC Robotics Restrictions Catch Companies Off Guard?

Applying the FCC’s criteria, a range of familiar products could fall within scope if they are foreign-produced, move on the ground, weigh more than 4.4 pounds together with any dock or base station, and connect to a network at 200 kilobits per second or more. Each requires model-specific confirmation, but the following illustrate where companies are often caught off guard:

  • Robot vacuums and mops. Many Wi-Fi-connected models, once the weight of the self-emptying or charging dock is included, exceed the 4.4-pound threshold.
  • Robotic lawn mowers. App-controlled mowers that navigate yards using sensors and connect to home networks or cellular service may meet each element of the definition.
  • Hospital and hotel delivery robots. A mobile robot that delivers medications, linens, or room-service orders does not qualify for the medical-device exclusion simply because it operates in a hospital.
  • Warehouse and factory vehicles. Automated guided vehicles that follow fixed floor paths may still qualify, and “industrial use” alone does not bring a mobile robot within the exclusion for fixed, stationary robots.
  • Restaurant, retail, and security robots. Inventory-scanning robots, telepresence units, and security patrol robots typically combine ground mobility, sensors, and network connectivity.
  • “American” robots built with imported parts. A robot designed by a U.S. company and assembled in the United States may still be “foreign-produced” if domestic components do not exceed the applicable cost threshold, as discussed below.

“Foreign-produced” also has a specific meaning. The FCC looks to whether the device qualifies as a “domestic end product” under 48 C.F.R. § 25.101(a). Its guidance identifies two requirements: U.S. manufacture and domestic component costs exceeding the applicable threshold, 65% for items delivered from 2024 through 2028 and 75% beginning in 2029. The commercially available off-the-shelf exception does not apply, so off-the-shelf components must be counted. Manufacturer nationality, U.S. ownership, and domestic final assembly, standing alone, therefore do not establish that a product falls outside the restrictions.

What Should Companies Verify About Existing FCC Authorizations and Product Changes?

Previously authorized models generally may continue to be imported, marketed, sold, and used. Consumers are not required to stop using devices they lawfully purchased.

Companies should nevertheless confirm that an authorization corresponds to the actual model and configuration being offered. Hardware substitutions, connectivity changes, software releases, and other modifications warrant review before the business assumes that an existing authorization remains sufficient. Devices authorized through SDoC do not carry FCC IDs, so a missing FCC ID is not, by itself, evidence that a device is unauthorized.

When Should Companies Consider an Internal Compliance Review?

The FCC states that certification applicants must certify that their devices are not covered equipment and possess sufficient evidence to support that certification, although it does not prescribe specific documentation.

A targeted internal review may be appropriate when:

  • Authorization records do not match the product being imported or sold.
  • Engineering changes were not evaluated by the personnel responsible for equipment authorization.
  • Domestic-production claims lack manufacturing records or component-cost calculations.
  • An exclusion is based on the product’s customer base rather than its characteristics.
  • A launch proceeds despite unresolved authorization questions.

Particular attention should be paid to unsupported statements repeated in customer certifications, regulatory submissions, financing documents, or transaction disclosures. A mistaken internal assumption can become a broader legal problem when incorporated into external representations.

Customers Are Requiring Compliance Certifications: Legal Risks for Suppliers

End purchasers, including retailers, distributors, hospital systems, logistics operators, and government contractors, are requesting written FCC compliance certifications. These requests have appeared in purchase orders, vendor onboarding questionnaires, master supply agreements, and renewal negotiations, and are accompanied by short deadlines and broadly worded representations, indemnities, or termination rights.

These certifications create contractual and regulatory exposure. An inaccurate certification can expose the supplier to breach-of-contract and indemnity claims, product returns or recalls, lost customer relationships, and, where a customer passes the representation along to a government agency, potential False Claims Act or similar liability. Before signing, companies should:

  1. Confirm the certification is limited to specific models and configurations;
  2. Tie the statement to the documented compliance file rather than general assurances;
  3. Avoid absolute language where facts depend on suppliers or component costs; and
  4. Designate who may approve and sign certifications.

Companies that buy robots should likewise consider requesting these certifications from their own vendors to protect their operations and resale channels.

Evaluate FCC Conditional Approval Separately

Foreign-produced devices may qualify for conditional approval through a Department of War review process submitted via the FCC, and any entity involved in producing a device may apply. Companies pursuing this path should ensure submissions accurately describe the products at issue and should not assume that an approval obtained by a commercial partner covers their own products or configurations.

How Companies Can Strengthen FCC Robotics Compliance

Companies should consider the following measures.

  1. Build a product-level compliance file. Record each model’s technical classification, production analysis, authorization pathway, applicable exclusions, and conditional-approval status, with supporting documentation.
  2. Integrate authorization review into change control. Require engineering and compliance approval before changes that could affect a product’s regulatory status.
  3. Control customer certifications and external representations. Route customer compliance certifications through a designated approval process, and align contracts, marketing materials, customer questionnaires, and transaction disclosures with verified product information.
  4. Establish escalation procedures. Define when discrepancies require legal review, record preservation, shipment or launch holds, and corrective action.

For business leaders, the central compliance priority is that coverage determinations cannot rest on assumptions about where a company is headquartered or how a product is marketed. Customers are no longer taking those assumptions on faith. Companies that maintain a defensible link between each product’s technical and manufacturing facts, its authorization status, and the claims made about it — and that bring engineering, compliance, sales, and legal functions together to test that link — will be better positioned to protect revenue, answer customer certification requests with confidence, and resolve discrepancies before they become regulatory inquiries, contractual disputes, or transaction issues.

For assistance on U.S. market access and compliance risks for foreign-produced robotics, please contact AGG International Compliance & Risk attorneys Allison Raley and Nikita Kulkarni.